Xstatic X-240BAR RGBA, User Manual

Page: 7 / 14

7
3. DIMMING MODE
Press the MODE button until
COLR
displays on the Menu screen. Then
repeatedly pressing the SETUP button will scroll through 4 selections,
RED (
R
), GREEN (
G
), BLUE (
B
), and AMBER (
A
). Each of the R, G, B, vand
A selections
MENU OPTIONS CONT’D:
4. SOUND MODE
- This menu will let you navigate and select your de -
sired Sound Mode settings.
Press the MODE button until
SU.20
displays on the Menu screen. The
menu will display the parameters
SU.00 - SU.3 1.
indicating the level of sen -
sitivity of the Microphone (default is 20). Pr or - will allow the user
to set the level of Sound sensitivity of the light fixture.
Note that this fixture has DMX Auto Detection, so regardless of any other Mode
setting, if there is DMX signal present, it will automatically turn on it’s DMX Mode.
When DMX is no longer present, the fixture returns to previous Mode setting
(infrared remote control also disabled when in DMX Mode).
5. DMX MODE
Press the MODE button until
d. 001
displays on the Menu screen.
The DMX Channel can be selected by pressing the UP and DOWN buttons
and selecting
d. 001
-
d. 512
. By default, the fixture uses a 2 Channel
Configuration.
More DMX Channel configurations can be used by pressing the SETUP
button and selecting either 3-ch ,4-ch,
6
-ch , or 32-ch . The following
pages contain Control Charts for each channel mode.
6. MASTER/SLAVE MODE
Press the MODE button until
SLAV
displays on the Menu screen. The fixture
will be slaved to which ever lead device is being controlled. Each fixture
acts as a Master when not in Slave Mode.