Xstatic X-240BAR RGBA, User Manual

Page: 13 / 14

13
IR REMOTE CONTROL:
On Buttons 0-9, the LEDs will display the associated colors when selected.
0 1 2 3 4 5 6 7 8 9
White Red Amber Yellow1 Green Cyan Blue Purple Pink Yellow2
DIMMING MODE
By selecting MANUAL and then a Color Button labeled with either R, G, or
B, you can create your own color mix by increasing or decreasing the value
of that single color. These buttons are outlined on the remote in the form of
an upside-down “T” shaped box. Pr or - will increase the bright -
ness.
Press the button “MANUAL”, then press down “R”, “G” or “B” or “2” to
enter dimming mode. Press “0”~“9” buttons in turn, enter a number value
between 0-100. Press the “%” button again, to confirm the number is the
percentage of the color. For example, press the “MANUAL” + “R” + “5” +
“0” + “%” in turn, set the red LED brightness is on at 50%.
NOTE
The numbered buttons are used as the number, like “2”, or a color like “Amber”
allows the buttons to have two functions. Press the “MANUAL” button and next
press a number button, it is only equivalent to it’s color, like “Amber”. If press
“2” button in other time, is equivalent to press “2” numeric button. For example:
Press the “MANUAL” + “2” + “5” + “0” + “%” in turn, set the Amber led brightness
is 50% dimmed.
10. RESTORE FACTORY SETTINGS
Pressing BLACK OUT, then 9, 8, and 7 will reset the fixture to default facto -
ry settings.