Service & Repair Manual
3
Copyright ©2015 XS Scuba
This manual provides factory prescribed procedures for the correct service and repair of the SeaAir
regulator, including the first and second stage. It is not intended to be used as an instructional manual for
untrained personnel. The procedures outlined within this manual are to be performed only by personnel
who have received factory authorized training through a repair seminar that has been directly sponsored
by XS Scuba.
If you do not completely understand all of the procedures outlined in this manual, contact
XS Scuba
to speak directly with a Technical Advisor before proceeding any further.
Warnings, Cautions, & Notes
Pay special attention to information provided in Warnings, Cautions, and Notes that are accompanied
by one of these symbols:
A
WARNING
indicates a procedure or situation that may result in serious injury or death if instructions are not
followed correctly.
A
CAUTION
indicates any situation or technique that will result in potential damage to the product, or render
the product unsafe if instructions are not followed correctly.
A
NOTE
is used to emphasize important points, tips, and reminders.
Scheduled Service
Because the SeaAir regulator is considered to be a life-supporting product, it is extremely critical that it
receives service according to the procedures outlined in this manual on a regularly scheduled basis; at least
once a year with normal or infrequent use.
NOTE
: A unit that receives heavy or frequent use, such as in rental, instruction, or commercial ap-
plications, should be serviced at least twice each year - or more often - depending on the conditions
of use and the manner in which it is maintained. (Refer to the care and maintenance procedures
outlined in the SeaAir User's Guide.)
When performing service, whether it is a routine overhaul or a repair of a specific problem, it is im-
portant to understand how the regulator is designed and how it operates. If you have any questions, please
consult your XS Scuba representative.
EAN/ Nitrox Service
Newly manufactured XS Scuba regulators are assembled and packaged to be compatible with oxygen
enriched air (EAN/ Nitrox), not to exceed 40% oxygen content. If the regulator is going to be used for this
application, however, it must be dedicated and clearly labled as such, in order to prevent any crossover use
with standard compressed air.
Refer to the instructions provided in the XS Scuba Authorized
Service Document, titled - Regulator Parts Cleaning Procedures.
CAUTION
: It is important to avoid using, testing, or otherwise pressurizing a dedicated EAN
regulator with standard compressed air, which contains hydrocarbon contaminants.
Introduction
1
SECTI
O
N
Summary of Contents for SEAAIR
Page 1: ...Service Repair Manual SERVICE AND REPAIR MANUAL SEAAIR REGULATOR PN RG200 Revised 02 11...
Page 30: ......
Page 31: ......