Now do your usual regulator pressure test for any leaks. Parts to convert from DIN to Yoke Fig.13
Page 1: ...R250 First Stage Regulator Conversion From DIN to Yoke...
Page 2: ...below Yoke conversion Parts are now included with OMS regulators and are shown in Fig 13 Using a 6mm Allen tool remove the Filter Retainer if you find it hard to loosen the filter Retainer Screw use...
Page 3: ...body of the regulator Do Not Remove Place the yoke on top of the black spacer as shown in fig 10 Fig 9 Fig 10 Make sure the Yoke Nut O Ring is cleaned and lightly greased And that the O ring seating a...
Page 4: ...Now do your usual regulator pressure test for any leaks Parts to convert from DIN to Yoke Fig 13...
