19
www.XSscuba.com
If still pressurized, operate
the purge button and power
inflate button to blow out any
excess water. Towel dry.
3.
Do not store the MultiMax with
air pressure supplied to it.
4. Whenever you remove the QD
inflator hose, be sure to install
the protective inlet cap. This
keeps water and contami
-
nants from entering the inlet
and reaching the breathing
valve (see 1.b.ii above).
5. Store the MultiMax in a
ventilated, cool, dry place, out
of direct sunlight.
CAUTION:
DO NOT
store your regulator in a hot
environment or near an
electric motor, which
produces ozone. Prolonged
exposure to heat, ozone,
chlorine fumes or ultraviolet
rays can cause premature
degradation of your regula-
tor’s soft parts and hoses.
Dealer Inspection and
Service
Do not assume that your MultiMax
is in good working order because
it has received little use since its
last servicing. Storage can be
hard on a breathable inflator as
seals and other soft parts can
take a set and dry out.
