12
Short
In the setup and subset menus press to scroll
In the setup submenus, press to change the value
In MTC and customer calibration mode, press to change the value.
Long-press
(3s)
In measure mode, keep one of the two keys pressed to change the temperature
in MTC mode (manual compensation, without probe). When the value starts to
flash, the user can change the temperature value by entering the correct one and
confirming with
.
IMPORTANT:
•
When the Sleep mode is active (by default after two minutes of inactivity of the instrument) press
any key to reactivate the brightness of the display.
•
Only at this point do the keys regain their function.
•
Inputs / Outputs connections
Use original accessories guaranteed by the manufacturer only.
If necessary, contact your local distributor.
The BNC connectors are protected by a plastic cap.
Remove the cap before connecting the probes.
OXY 7 Vio top panel
READ THE MANUAL BEFORE PROCEEDING TO CONNECT THE PROBES OR PERIPHERALS
BNC for
polarographic sensor
RCA for
temperature probe
of the polarographic sensor