02
5.0 LOCATING THE BALANCE
• The balance should not be placed in a location that will reduce the accuracy.
• Avoid extremes of temperature. Do not place in direct sunlight or near air
conditioning vents.
• Avoid unsuitable tables. The table or floor must be rigid ,no vibration.
• Avoid unstable power sources. Do not use near large users of electricity
such as welding equipment or large motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause condensation. Avoid direct contact
with water. Do not spray or immerse the balances in water.
• Avoid air movement such as from fans or opening doors. Do not place near
open windows or air-conditioning vents.
• Keep the balance clean. Do not stack material on the balances when they
are not in use.
6.0 SETTING UP THE BALANCE
6.1 ASSEMBLING THE BALANCE
• Locate balance on solid surface, free from vibration
• Open the sliding door and gently place the stainless steel top.
• Level balance using the adjustable feet and the bubble level
• Connect the power to the balance
• For best performance, let the balance warm up for 30-60 min. and calibrate
before using
6.2 LEVELLING THE BALANCE
After placing the balance in a suitable place, level it by using the bubble level.
To level the balance turn the two adjustable feet at the rear of the balance until
the bubble in the bubble level is center.
03
7.0 OPERATION SETTINGS
1.State Icon 2. Function State 3.Weighing Digits
4.Notes 5.Operation Keys
7.1 SENSITIVITY SETTING
--Highest Sensitivity
-Normal Sensitivity
-Sensitivity
04
