background image

2

BEFORE YOU START

This is a high-competition, high-quality RC car intended for persons aged 16 

years and older with previous experience building and operating RC model 

racing cars. This is not a toy; it is a precision racing model. This model racing 

car  is  not  intended  for  use  by  beginners,  inexperienced  customers,  or  by 

children without direct supervision of a responsible, knowledgeable adult. If 

you  do  not  fulfill  these  requirements,  please  return  the  kit  in  unused  and 

unassembled form back to the shop where you have purchased it.

Before building and operating your XRAY, YOU MUST read through all of the 

operating instructions and instruction manual and fully understand them to 

get the maximum enjoyment and prevent unnecessary damage. 

Read  carefully  and  fully  understand  the  instructions  before  beginning 

assembly.

Make sure you review this entire manual, download and use set-up book from 

the web, and examine all details carefully. If for some reason you decide this 

is not what you wanted or expected, do not continue any further. Your hobby 

dealer can not accept your kit for return or exchange after it has been partially 

or fully assembled.

Contents  of  the  box  may  differ  from  pictures.  In  line  with  our  policy  of 

continuous product development, the exact specifications of the kit may vary 

without prior notice. 

SAFETY PRECAUTIONS

Contains:

LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)

WARNING: This product contains a chemical known to the state of California 

to cause cancer and birth defects or other reproductive harm.

CAUTION: CANCER HAZARD

Contains  lead,  a  listed  carcinogen.  Lead  is  harmful  if  ingested.  Wash 

thoroughly after using. DO NOT use product while eating, drinking or using 

tobacco  products.  May  cause  chronic  effects  to  gastrointestinal  tract,  CNS, 

kidneys, and blood. MAY CAUSE BIRTH DEFECTS.

When  building,  using  and/or  operating  this  model  always  wear  protective 

glasses and gloves.

Take  appropriate  safety  precautions  prior  to  operating  this  model.  You  are 

responsible  for  this  model‘s  assembly  and  safe  operation!  Please  read  the 

instruction manual before building and operating this model and follow all 

safety  precautions.  Always  keep  the  instruction  manual  at  hand  for  quick 

reference, even after completing the assembly. Use only genuine and original 

authentic XRAY parts for maximum performance. Using any third party parts 

on this model will void guaranty immediately.

Improper  operation  may  cause  personal  and/or  property  damage.  XRAY 

and  its    distributors  have  no  control  over  damage  resulting  from  shipping, 

improper  construction,  or  improper  usage.  XRAY  assumes  and  accepts  no 

responsibility for personal and/or property damages resulting from the use 

of  improper  building  materials,  equipment  and  operations.  By  purchasing 

any  item  produced  by  XRAY,  the  buyer  expressly  warrants  that  he/she  is  in 

compliance with all applicable federal, state and local laws and regulation 

regarding the purchase, ownership and use of the item. The buyer expressly 

agrees to indemnify and hold harmless XRAY for all claims resulting directly 

or indirectly from the purchase, ownership or use of the product. By the act 

of assembling or operating this product, the user accepts all resulting liability. 

If the buyer is not prepared to accept this liability, then he/she should return 

this kit in new, unassembled, and unused condition to the place of purchase.

 IMPORTANT NOTES – GENERAL

•  This product is not suitable for children under 16 years of age without the 

direct supervision of a responsible and knowledgeable adult.

•  Carefully read all manufacturers warnings and cautions for any parts used 

in the construction and use of your model.

•  Assemble this kit only in places away from the reach of very small children.

•  First-time  builders  and  users  should  seek  advice  from  people  who  have 

building experience in order to assemble the model correctly and to allow 

the model to reach its performance potential.

•  Exercise care when using tools and sharp instruments.

•  Take care when building, as some parts may have sharp edges.

•  Keep  small  parts  out  of  reach  of  small  children.  Children  must  not  be 

allowed to put any parts in their mouth, or pull vinyl bag over their head.

•  Read and follow instructions supplied with paints and/or cement, if used 

(not included in kit).

•  Immediately  after  using  your  model,  do  NOT  touch  equipment  on  the 

model such as the motor and speed controller, because they generate high 

temperatures. You may seriously burn yourself seriously touching them.

•  Follow the operating instructions for the radio equipment at all times.

•  Do not put fingers or any objects inside rotating and moving parts, as this 

may cause damage or serious injury as your finger, hair, clothes, etc. may 

get caught.

•  Be sure that your operating frequency is clear before turning on or running 

your model, and never share the same frequency with somebody else at the 

same time. Ensure that others are aware of the operating frequency you 

are using and when you are using it.

•  Use a transmitter designed for ground use with RC cars. Make sure that no 

one else is using the same frequency as yours in your operating area. Using 

the same frequency at the same time, whether it is driving, flying or sailing, 

can cause loss of control of the RC model, resulting in a serious accident. 

•  Always turn on your transmitter before you turn on the receiver in the car. 

Always turn off the receiver before turning your transmitter off.

•  Keep the wheels of the model off the ground when checking the operation 

of the radio equipment.

•  Disconnect the battery pack before storing your model.

•  When learning to operate your model, go to an area that has no obstacles 

that can damage your model if your model suffers a collision.

•  Remove  any  sand,  mud,  dirt,  grass  or  water  before  putting  your  model 

away.

•  If  the  model  behaves  strangely,  immediately  stop  the  model,  check  and 

clear the problem.

•  To  prevent  any  serious  personal  injury  and/or  damage  to  property,  be 

responsible when operating all remote controlled models.

•  The model car is not intended for use on public places and roads or areas 

where its operation can conflict with or disrupt pedestrian or vehicular traffic.

•  Because  the  model  car  is  controlled  by  radio,  it  is  subject  to  radio 

interference from many sources that are beyond your control. Since radio 

interference  can  cause  momentary  loss  of  control,  always  allow  a  safety 

margin in all directions around the model in order to prevent collisions.

•  Do not use your model:

  - Near real cars, animals, or people that are unaware that an RC car is being   

  driven.

  - In places where children and people gather

  - In residential districts and parks

  - In limited indoor spaces

  - In wet conditions

  - In the street

  - In  areas  where  loud  noises  can  disturb  others,  such  as  hospitals  and  

   residential areas.

  - At night or anytime your line of sight to the model may be obstructed or  

   impaired in any way.

To prevent any serious personal injury and/or damage to property, please be

responsible when operating all remote controlled models.

CUSTOMER SUPPORT 

XRAY Europe

K Vystavisku 6992

91101 Trenčín

Slovakia, EUROPE

Phone: 421-32-7401100

Fax: 421-32-7401109

E-mail: [email protected]

We  have  made  every  effort  to  make  these  instructions  as  easy  to  understand  as 

possible. However, if you have any difficulties, problems, or questions, please do not 

hesitate to contact the XRAY support team at [email protected]. Also, please visit 

our Web site at www.teamxray.com to find the latest updates, set-up information, 

option parts, and many other goodies. We pride ourselves on taking excellent care 

of our customers.
You can join thousands of  XRAY fans and enthusiasts in our online community at:

  

www.teamxray.com

XRAY USA

RC America, 2030 Century Center Blvd #15 

Irving, TX 75062 

USA

Phone: (214) 744-2400

Fax: (214) 744-2401

E-mail: [email protected]

FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT.

Summary of Contents for XT4

















































Reviews: