Xray XB4, Instruction Manual

Page: 12 / 40

12
ANTI-ROLL BARS
#362470 1.0mm (OPTION)
#362471 1.1mm (OPTION)
#362472 1.2mm (STANDARD)
#362473 1.3mm (OPTION)
#362474 1.4mm (OPTION)
#362476 1.6mm (OPTION)
#362478 1.8mm (OPTION)
3. REAR SUSPENSION
363110
363320
362315
367210
362315
363310
903312
901304
362001
903312
902308
363120
901303
303431-K
303454
901308
303454
30 3431-K ALU 4.9MM BALL END - BLACK (2)
30 3454 BALL JOINT 4.9MM - OPEN (4)
36 2001 DIFF BULKHEAD BLOCK SET REAR
36 2315 ECCENTRIC BUSHING SET (2)
36 2470 ANTI-ROLL BAR 1.0 MM (OPTION)
36 2471 ANTI-ROLL BAR 1.1 MM (OPTION)
36 2472 ANTI-ROLL BAR 1.2 MM
36 2473 ANTI-ROLL BAR 1.3 MM (OPTION)
36 2474 ANTI-ROLL BAR 1.4 MM (OPTION)
36 2476 ANTI-ROLL BAR 1.6 MM (OPTION)
36 2478 ANTI-ROLL BAR 1.8 MM (OPTION)
36 3110 COMPOSITE SUSPENSION ARM REAR LOWER RIGHT
36 3120 COMPOSITE SUSPENSION ARM REAR LOWER LEFT
36 3310 ALU REAR LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)
36 3320 ALU REAR LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
36 7210 SUSPENSION PIVOT PIN (2)
90 1303 HEX SCREW SB M3x3 (10)
90 1304 HEX SCREW SB M3x4 (10)
90 1308 HEX SCREW SB M3x8 (10)
90 2308 HEX SCREW SH M3x8 (10)
90 3312 HEX SCREW SFH M3x12 (10))
BAG
Remove the 3x6.5x2mm shim from each rear arm, this shim
will be used in Rear Transmition section on page 19, step 1.