14
CASTER
VIDEO TECH TIP
▶
902308
SH M3x8
902308
SH M3x8
3. CENTRAL TRANSMISSION
NOTE ORIENTATION FOR ALL PARTS
Never use alu or titanium screws
for the eccentric bushings.
Never use alu or titanium screws
for the eccentric bushings.
1 Dot = 5.5º Caster
3 Dots = 3.5º Caster
2 Dots = 4.5º Caster
1 Dot = 0.5º Caster
CASTER
CASTER
1 Dot = 3.0º Caster
3 Dots = 2.5º Caster
3 Dots = 5.0º Caster
2 Dots = 1.5º Caster
(INITIAL SETTING)
(INITIAL SETTING)
2 Dots = 4.0º Caster
CASTER ADJUSTMENT
FRONT CASTER
For most conditions, a good starting
point for front caster set is 4.0°
Increasing front caster will increase
steering (mainly on-power), but it
will also make the car more difficult to
drive and more likely to traction roll.
REAR CASTER
A good starting point for rear caster
is 4.5°
More rear caster will increase traction
and steering. Less rear caster will
increase rotation of the car.
IMPORTANT
All 4 bushings at one end of the car must
be installed in the same orientation.
IMPORTANT
All 4 bushings at one end of the car must
be installed in the same orientation.
ALU CASTER BUSHINGS
#302310 FRONT 3° / REAR 5.5° or 0.5° 1 Dot OPTION
#302311 FRONT 4° / REAR 4.5° or 1.5° 2 Dots INCLUDED
#302312 FRONT 5° / REAR 3.5° or 2.5° 3 Dots OPTION
Summary of Contents for X4F
Page 1: ......
