17
2. REAR SUSPENSION
902258
SH M2.5x8
303122
SHIM 3x6x1
303122
SHIM 3x6x1
303123
SHIM 3x6x2
303123
SHIM 3x6x2
Do not tighten fully,
pivotballs must turn freely.
Do not tighten fully,
pivotballs must turn freely.
2x
NOTE
ORIENTATION
NOTE
ORIENTATION
Tighten the screw enough to
remove excess play, while ensuring
that the pod plate can turn freely.
REARWARD:
(INITIAL SETTING)
Pivot mounted in rearward chassis holes, and 1mm shim used under the pivot ball.
The rearward pivot mounting position gives the most steering and most free rear end.
Recommended for high-traction conditions such as US black carpet.
FORWARD:
Pivot mounted in forward chassis holes, with 3mm shims under the pivot ball. The
forward pivot mounting position gives a good balance between front and rear traction.
PIVOT MOUNTING ALTERNATIVE
Ensure free,
smooth movement
902256
SH M2.5x6
Do not use shims for
initial setting.
#303122 & 303123
shims are NOT INCLUDED in the kit.
1mm
1mm
2mm
ROLL CENTER ADJUSTMENT
The roll center can be adjusted by adding or
removing shims from beneath the aluminum pivot
mounts.
LOWER ROLL CENTER
(INITIAL SETTING - NO SHIMS)
will give more
traction and increased chassis roll.
HIGHER ROLL CENTER
(adding shims)
will increase steering by making
the car rotate more on- and off-power
IMPORTANT! Always use same shim thickness on
both sides of both aluminum holders
NOTE ORIENTATION
Do not use shims for
initial setting.
