This section describes how to interpret the meaning of the tweak station readings, and the adjustments to make to the car’s anti-roll bars to remove
tweak. Adjusting tweak using anti-roll bars with anti-roll bars attached.
This section describes how to adjust tweak when using “wire-type” anti-roll bars.
FRONT STANDS: ON TWEAK STATION
REAR STANDS: ON SET-UP BOARD
frOnT rIGHT
WHeel TWeAk
reADInG
frOnT lefT
WHeel TWeAk
reADInG
meAnInG
AcTIOn
No tweak at rear of car.
None.
Excess load on FRONT LEFT wheel on
tweak station.
reSUlTInG frOm:
Excess load on REAR RIGHT wheel on set-
up board.
SHORTEN the REAR RIGHT anti-roll bar linkage.
+ LENGTHEN the REAR LEFT anti-roll bar linkage.
Adjust both rear anti-roll bar linkages equally but in
opposite amounts.
Excess load on FRONT RIGHT wheel on
tweak station.
reSUlTInG frOm:
Excess load on REAR LEFT wheel on set-up
board.
SHORTEN the REAR LEFT anti-roll bar linkage.
+ LENGTHEN the REAR RIGHT anti-roll bar linkage.
Adjust both rear anti-roll bar linkages equally but in
opposite amounts.
reAr lefT
WHeel TWeAk
reADInG
reAr rIGHT
WHeel TWeAk
reADInG
meAnInG
AcTIOn
No tweak at front of car.
None.
Excess load on REAR RIGHT wheel on
tweak station.
reSUlTInG frOm:
Excess load on FRONT LEFT wheel on set-
up board.
SHORTEN the FRONT LEFT anti-roll bar linkage.
+ LENGTHEN the FRONT RIGHT anti-roll bar linkage.
Adjust both front anti-roll bar linkages equally but in
opposite amounts.
Excess load on REAR LEFT wheel on tweak
station.
reSUlTInG frOm:
Excess load on FRONT RIGHT wheel on
set-up board.
SHORTEN the FRONT RIGHT anti-roll bar linkage.
+ LENGTHEN the FRONT LEFT anti-roll bar linkage.
Adjust both front anti-roll bar linkages equally but in
opposite amounts.
adJUSTING TWEaK USING aNTI-ROLL BaRS
adJUSTING REaR TWEaK (aNTI-ROLL BaRS)
IMPORTANT: ADjUST TWEAK USING ANTI-ROLL BARS ONLY AFTER YOU HAVE ADjUSTED TWEAK
USING SPRING PRELOAD.
adJUSTING FRONT TWEaK (aNTI-ROLL BaRS)
FRONT STANDS: ON SET-UP BOARD
REAR STANDS: ON TWEAK STATION
IMPORTANT: ADjUST TWEAK USING ANTI-ROLL BARS ONLY AFTER YOU HAVE ADjUSTED TWEAK
USING SPRING PRELOAD.
TWEAK
