18
WHEELBASE
FRONT ROLL CENTER
FRONT CAMBER RISE
CASTER
Ensure that the suspension arms move freely.
Ensure that the eccentric holders move freely.
Do not insert ball into cup too deeply
or bars will bind during operation
Each anti-roll bar blade has a hex hole at its end. Use
a 1.5mm hex wrench to adjust the blades.
Tighten fully
4mm
2mm
1mm
fRONT ANTI-ROLL BAR
2x
2x
4. FRONT SUSPENSION
902310
SH M3x10
901408
SB M4x8
902310
SH M3x10
COMPOSITE SET OF BUSHINGS
Use 0mm suspension holders for initial assembly
INITIAL SETTING
