23
c
m
y
k
nt18t manual page23
14.
2.
14.
3.
Use sufficient shims to
obtain minimal clutchbell
endplay - movement of
clutchbell along crankshaft.
5.3 x 8.7 x 0.3/0.5
Tighten the flywheel using
HUDY wrench #170070
7.5~7.7mm
DETAIL
DETAIL
Note the orientation of the
clutch shoes. The short side
of spring must be in the
groove of the flywheel nut.
After assembling the
flywheel, the end of the
crankshaft should protrude
7.5~7.7mm from the nut.
If necessary, disassemble
parts and add shims
behind collar (as shown in
previous step). Reassemble
and check.
17.
14.
1.
ORIENTATION
TIGHTEN
GENTLY
DETAIL
964053
S 5.3x8.7x0.3
964054
S 5.3x8.7x0.5
930407
BB 4x7x2.5
965032
C 3.2
906258
2.5x8
970025
O 2.5x1
