12
/
16
When the Battery is Removed
Do not touch the “+” and “-” terminal contacts on the top of the battery when the battery is
removed from the bike.
Be careful not to drop or damage the battery when loose from the bike.
Avoid damaging the exposed connector terminals and keep them clear of debris.
How to Charge Your Bike
The battery can be charged when locked on the bike or unlocked and removed from the bike.
Before Charging, please turn off the battery switch.
1) Remove the rubber cover on the charging port and insert the charger into the charging port.
2) Plug the charger into an appropriate power outlet. When the charger is plugged in, the red
light on the charger will illuminate to show that the battery is charging.
3) Charge the battery, making sure not to charge for longer than 15 hours at a time. When the
battery is fully charged, the LED will turn green and charging will be stopped.
Note
: The charger is designed to automatically stop charging when the battery is full, but
unnecessary wear of the charging components could occur if the charger is left attached to the
battery and a power source for longer than 15 hours. Detach the charger as soon as possible
once the green light indicates a complete charge, to avoid unnecessary wear of charging
components.
4) Once the battery is charged, unplug the charger from the power outlet.
5) Unplug the charger from the battery. Store the charger in a safe place for future use.
Do not leave a charging battery unattended. Never charge a battery for more than 15
hours at a time. Failure to follow battery charging best practices could result in
unnecessary wear to the charging components, battery, and or charger, and could lead to
an under-performing or non-functional battery and replacement will not be covered under
warranty.
