XPRESSFILL Systems LLC
|
4
265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • [email protected]
3
Optional Gas Sparge
If your fi ller has the gas sparge option, fi rst make sure you have the hose going into the fi ller safely
connected to your gas tank and pressure regulator. Th
e recommended pressure is 20 - 30 psi. To
fl ush your bottle, simply push the “Gas” button before you start the fi lling cycle.
NOTE: To make sure there is no air in the fl ow path, turn the inline sratiner upside down while
the pump is running. Th
is ensures that the air bubble in the strainer housing mostly dissolves,
although a little air bubble in the strainer is normal.
You are now ready to begin fi lling. Place an empty bottle(s) under the spouts. Turn on the Pump
Swith. Th
e fi lling process will start and stop automatically.
connector. Place the free end of the hose/rod
into your product. Th
e pump is self-priming
so it will begin drawing your product into the
fi liler when both the Power Switch and Pump
Swith are turned on.
Note: To make sure there is no air in the fl ow
path, turn the inline strainer upside down
while the pump is running. Th
is ensures that
the air bubbles in the strainer housing mostly
dissolves, although a little air bubble in the
strainer is normal.
6.
Empty the bottles and place them back
under the spouts, then press the start button.
Th
e digital timer will count down the fi ll time.
During the fi rst cycle, be ready to hit the stop
button in case you set the time too long. You
then can refi ne your level by changing the time.
Summary of Contents for XF4100
Page 1: ...XpressFill XF4100 XF2100...
