XPRESSFILL Systems LLC
|
2
265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • [email protected]
XPRESSFILL Systems LLC
|
2
Please Keep In Mind
Th
e level fi ller uses a self-priming pump. Due to small fl ow passages and precision components
in the fi ller, it is important to fi lter your product so you do not introduce particulates into the
machine. Failure to fi lter your product can result in damage to your bottle fi lling machine. In
most cases, the fi ller can be cleaned in the factory, however this is not a warranty repair.
265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • [email protected]
2
Set Up Your Filler
1.
Unpack the fi ller from the box. Place is on a
fl at surface where you plan to bottle.
Tip: To get familiar with your fi ller, you may
want to initially test it with water.
2.
Unscrew the fi xation screws holding the
shelf to the bottom of the machine. Plug the
electrical connector into the side of the fi ller
(shown with optional gas sparge).
Summary of Contents for XF4100
Page 1: ...XpressFill XF4100 XF2100...
