Snap the transfer kit onto the machine with the quick
connector after lightly lubricating the connector with
water. Place the free end of the hose/rod into your
product. The pump is self-priming so it will begin
drawing your product into the filler with both the
Power Switch and the Pump Switch are turned on.
Note:
To make sure there is minimal air in the flow
path, turn the inline strainer upside down while the
pump is running with four bottles in place. This
ensures that the air bubbles in the strainer housing
mostly dissolve, although a little air bubble in the
strainer is normal.
You are now ready to begin filling. Place an empty
bottle under each spout. Turn on the Pump Switch.
The filling process will start and stop automatically.
265 Prado Road, Suite 1 | San Luis Obispo, CA 93401 | 805.541.0100 | xpressfill.com | [email protected]
8
| XpressFill Systems LLC
