www.xprgroup.com
15
9. CONFIGURING THE BIOMETRIC READERS IN BIOMANAGER CS
BIOMANAGER CS is software for fingerprint management of XPR Biometric readers, when used with third party access controllers.
Main functions:
- Fingerprint Enrollment
It can be done by ANY Biometric reader in the network or by Desktop (USB) Biometric reader.
- Fingerprint Transfer
Finger templates can be sent to any Reader in the Network. Different Users can be sent to different Biometric readers.
- PIN Codes management and transfer
PIN Code length configuration (1 to 8 digits) and PIN Code transfer.
- Wiegand Output Configuration
The Wiegand output of the Biometric reader can be customized bitwise.
9.1 ADD PORTAL
9.2 ADD READER
Right-click on “Portal” and select “Add Portal”.
If the converter used for the Biometric Readers is RS-485 to TCP/IP converter, then create Portal by adding the IP Address
of the converter.(9.1)
If the converter used for the Biometric Readers is RS-485 to USB converter, then create Portal by adding the COM port of
the converter.(9.2)
Right-click on the portal connected to the
reader and select
Add reader
Fill the Reader form
Right-click on reader and select
Check Version
Click on
Save
and the reader icon
appears under the selected portal