www.xprgroup.com
14
8.9.4 FINGER ON CARD
Right click on the biometric reader
Select “Properties”
For “type” of the reader select “B100-MF FOC” (8.30)
Writing Template on the card
1. Open Users window
2. Select existing user or create new one
3. Enroll 1 or 2 fingers using B100PROX-USB Desktop Biometric Reader
4. Place the user card on the Desktop USB Reader.
5. Right click on the fingertip and select “Write to Card as F1” (8.31)
6. To put the second finger in the card, go to another fingertip and
select “Write to Card as F2”
7. If the fingerprints are not to be stored in the software database,
right click on the fingertip and select “Delete all”
8. If some user data other then fingerprints is edited or the
fingerprints should be saved in the software database, click Save,
otherwise go to another user or close the window if no other user
management is required.
Note:
Depending on the Mifare Card, 1 or maximum 2 fingers can be
written.1k Cards can store 1 fingerprint, 4K cards can store 2
fingerprints.
To use the “Finger on Card” mode:
Present the mifare card with written fingerprints in it, the reader will
beep and blink.
Present the finger on the Biometric Reader
Note:
In “Finger on Card” mode, there is NO LIMIT on the capacity of the fin-
gerprints, since the fingerprints are
stored in the user’s card, not in the biometric reader.
Note:
In “Finger on Card” Mode (FOC), the fingerprints are stored in the
card and in the software’s database.
If you want the fingerprints not to be stored in the database, then
tick the checkbox in: Settings/System Parameters (8.32)