a) Drag to select an area: Drag the cursor from one point to another on the screen.
b) Use the cursor to select an area: Select "Click to set screen area", then click the upper
left corner position and lower right corner position to select on the screen.
c) Coordinates: Manually enter coordinates in the corresponding input boxes for X, Y,
W and H.
3)
Identify: Identify all connected monitors. The numeric identifier will be displayed in the
lower left corner of each monitor.
4) Calibration: Hold the stylus in the usual way and click the tip of the stylus instead of the
cursor in the center of the red cross on the display to calibrate the offset between the
stylus and
cursor.
