A set of Filters is available for the Inflatable Blower models which will help prevent small debris and
dust from entering the unit. To clean the filters: Remove the filters from the unit and wash with warm
soapy water, rinse with clean water and let dry thoroughly before reinstalling.
Filters (Optional)
Installation:
Filters snaps into the air inlets.
Note:
The filter I is for Motor Side,
The filter II is for Fan Side
Filter Removal:
Pull the filters off the unit.
Note:
After cleaning make sure the
filters are dry before
reinstalling.
1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit
with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or any part of body.
3. To reduce the risk of fire or electric shock, do not use the Inflatable Blower with any solid-state
speed control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification
and / or install GFCI receptacle if necessary.
5. Do not operate any Inflatable Blower with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Inflatable Blower from the power supply before moving, servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or
similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around an Inflatable Blower at any time.
9. Do not move or carry an Inflatable Blower while unit is operating.
10. All Inflatable Blowers in operation must be supervised at all times.
Voltage / Frequency
115V / 60Hz
Amps
8
Power
1 HP
Rated Air
fl
ow (on high)
3600
Overhea
ti
ng Protec
ti
ng
T
h
er
m
ally
Speeds
one
Cord Length
20
ft
Housing
PP
Unit Weight
26.1 Lbs
Unit Size
17.5" x 21" x 18.5"