English - 5
Charge the Battery
• Connect the charger to the power source. The power indicator on the charger will shine
green.
• Then connect the charger to the machine. The power indicator on the charger will shine
red. When the battery is charged full, the power indicator on the charger will shine
green again.
•
WARNING: DO NOT
use unoriginal chargers or power adapters to charge the battery,
as this may cause malfunction or permanent damage to the battery or other related
safety concerns.
•
IMPORTANT:
Please charge the battery until full to activate the battery before the first
usage.
•
IMPORTANT:
To avoid the battery works on low capacity conditon and encounter
permanent damage, it’s recommended to charge the battery until full before each
usage and
NOT
to use this machine when charging.
Fill the Solutiong Tank
•
IMPORTANT:
Always turn the fogging volume control to the lowest setting before filling
the solution tank.
• Turn counterclockwise to open the solution tank cover, and fill designated solution or
liquid into the solution tank. Do not exceed the maximum capacity of the solution tank.
(
See Page 7: Fogging System Maintenance
) Close the solution tank cover.
Start Your Job
Control Panel
Fogging Volume Control
• Turn counterclockwise to increase fog volume. Turn
clockwise to decrease fog volume.
• When at the lowest position, no liquid will coming out.
Power Switch (For F-8B and F-16B only)
• Switch to “
O
” setting to turn the machine OFF. Switch
to “
I
” setting to turn the machine ON.
Speed Switch (For F-18B only)
• Switch to “
O
” setting to turn the machine OFF.
• Switch to other settings to turn the machine on. “
I
”/“
II
”
means the lower/higher speed setting.
Battery Indicator (For F-18B only)
• This light indicates the rest capacity of the battery.
