XPower AP-1500 Series, Owner'S Manual

Page: 11 / 49

English - 11
AP-1500 Series AP-1800 Series AP-2500 Series
Without Carbon Filter 270 Pa. 370 Pa. 340 Pa.
With Carbon Filter 350 Pa. 500 Pa. 500 Pa.
Control Panel (Continued)
• Even if the pressure gauge shows negative pressure is still lower than the values
below, it’s suggested to check and replace the filters every 6 months. ( See Page 12:
Filter Maintenance )
Selecting a Location (Important)
• Enclosed Area: For optimal efficiency and longer filter lifespan, the Air Scrubber should
be operated in an enclosed area. Keep all doors, windows and other outside entrances
to the room closed.
• Air Circulation: It’s suggested to have a constant efficient air circulation inside your
working area.
• Environment Humidity: For optimal efficiency and higher filter lifespan, the Air
Scrubber should not be operated in an environment with a high relative humidity level.
High humidity level could cause blockage and damage to filters.
• Power Cord: The power cord has a length of 25 feet (7.6 meters). Select a location
where the power cord can reach the power source.
• Inlet and Outlet Orientation: Also pay attention to the orientation of the air inlet and
air outlet. Make sure the airflow won’t influence any object nearby the Air Scrubber.
• IMPORTANT: The effectiveness of the Air Scrubber can be influenced by different
factors. You may also find that installing multiple Air Scrubbers may be required for
larger enclosed areas.
Wheels
Trolley
Handle
Exhuast
Transportation
Transport with Trolley
Handle
• Press down the
trolley handle to tilt
up the air scrubber
on the wheels.
• Push forward to
transport with the
trolley handle.