XPOtool 63898 User Manual Download Page 3

 

https://www.XPOtool.com 

 

Item 63898

 

Page 3

 

The Tool Experts

 

 

  

 

12 2022-1

 

 

Introduction

 

 

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to 
always take some basic safety precautions when using this product. Please read this operating manual 
carefully and make sure that you understand it.

 

Keep these operation instructions in a safe place.

 

 
 

Safety instructions

 

 

 CAUTION:

 

The  device  is  not  intended  for  use  by  persons  (including  children)  with  impaired  or  limited  physical, 
sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised 
by a person responsible for their safety or follow the instructions made by this person on how to correctly 
use the device. Children should be supervised to ensure that they do not play with the device.

 

 
 

Product description

 

 

The  toilet  waste  water  pump  consists  of  a  housing,  a  motor,  and  a  pump.  The  pump  is  suitable  for 
domestic sewage and sanitary facilities. The system automatically switches the pump on and off de-
pending on the liquid level.

 

 

 Attention!

 

 

Perform a visual inspection of the device before every use. Do not use the device if the safety 
appliances are damaged or worn out. Never override safety regulations.

 

 

Only use the device accordingly to the intended purpose stated in this manual.

 

 

You are responsible for the safety of the working zone.

 

 

If the cable or the plug is damaged due to external influences, the cable must not be used. The 
cable must be replaced with a new one. This work may only be carried out by an electrician.

 

 

The  voltage  of  230

 

V  AC  indicated  on  the  nameplate  of  the  device  must  match  the  existent 

mains voltage.

 

 

Never lift, carry, or fix the device by using the power cable.

 

 

Make sure that the electrical plug connection is protected from flood and moisture. Always un-
plug the device before working on it.

 

 

Avoid exposing the device to direct jets of water.

 

 

The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician, if necessary.

 

 

The user must take appropriate measures (e.g., installation of an alarm system, a reserve pump, 
etc.) to prevent damage caused by the flooding in case of device malfunctioning.

 

 

In case of device failure, repairs can only be carried out by an electrician. No responsibility is 
accepted for damage caused by improper maintenance or use.

 

 

The device must never run dry or be operated with its suction line fully closed. The manufac-
turer’s warranty is void for damage to the device caused by dry running.

 

 

Do not use this device to operate swimming pools.

 

 

This device must not be integrated into any kind of domestic water circuit meant for potable 
water.

 

 

Pumping aggressive liquids and abrasive substances must always be avoided.

 

 

The pump must be protected from frost and it must be made sure that it cannot run dry.

 

 

The device must not be installed in septic tanks or pump shafts.

 

 

Avoid that chemical solvents, strong acids, or bases enter the device.

 

 

Only dispose of your toilet paper, faeces, and waste water via the device. Any other kind of 
waste must not be thrown into the toilet.

 

 

Avoid that too much hair enters the device.

 

 

Summary of Contents for 63898

















Reviews: