https://www.XPOtool.com
Item 63897
Page 13
The Tool Experts
02 2023-1
Sucking and blowing
Using the sucking function
If you use the suction function, check the collection bag in time. When
full, unzip the collection bag and empty it.
Using the blowing function
Always pay attention to the strength and direction of the airstream.
Never direct the blower exhaust stream at people or animals.
Warning!
Before servicing this machine, shut off the engine and
disconnect the spark plug cable.
•
Clean dirt and debris from the outside of the blower.
•
Check the engine, tank, and hoses for possible fuel leaks and
repair them.
•
Check the engine cooling fins for a build-up of dirt and debris
and clean them if necessary.
Inspect the entire machine for damage, loose, or missing parts or
fasteners and repair them if necessary.
Maintenance
Every 10 hours of operation (more often in dusty working conditions)
1.
Loosen the air filter cover mounting screw and remove the cover and filter element.
2.
Check the filter. If the filter element is deformed or damaged, replace it with a new one.
3.
Clean the filter in clean fuel and squeeze it out or dry it with a hair dryer. Wash the air filter cover
in clean fuel and wipe it clean or dry it with a hair dryer.
4.
Insert the element and cover and tighten the cover fixing screw.
Every 10 to 15 hours of operation
1.
Remove the spark plug with a spark plug wrench (turn it anti-clockwise).
2.
Clean the spark plug gap and adjust it to 0.6–0.7
mm. Replace any damaged or visibly worn
spark plug with a type L7RTC spark plug or equivalent.
3.
Screw the spark plug into the cylinder head by hand, then tighten it securely with the spark plug
wrench. If you have a torque wrench, tighten the spark plug to 16.7–18.6
Nm.
Every 50 hours of operation
•
But more often if you notice decreased performance
•
Inspection: Inspect the entire machine and hoses for damage, including loose or missing parts,
and repair if necessary.
•
Spark plug: Replace the spark plug with an L7RTC plug with a gap of 0.6–0.7
mm.
•
Fuel filter: Using a wire hook, pull out the fuel filter from inside the fuel filter. Then remove the
filter element and wash it in clean fuel.
•
Before reinstalling the filter, check the condition of the fuel line. If any damage or deterioration
is noted, the leaf blower should be withdrawn from service until it can be inspected by a qualified
professional.
