https://www.XPOtool.com
Item 63426
Page 5
The Tool Experts
09 2022-1
Machining flat steel
1.
Insert an appropriate circle forming piece and angle forming piece.
2.
Hold one end of the flat steel between the circle forming piece and angle forming piece, form a
angle, then loosen the handle.
3.
Move the clamping point of the workpiece and gradually turn the handle until a ring forms as
shows.
Note!
To form different shapes, you can choose different clamping points.
1.
In case you wish to bend several portions of identical length, you can use the adjustment pin to
define the length of the workpiece.
2.
Insert the pin into the adjustment hole of the bending machine, then slide it until it has the correct
length, and tighten the small rotary knob.
Using an appropriate angle piece and the appropriately adjusted pin, you can form your workpiece as
shown; so, you will able to shape square workpieces, e.g.
