https://www.XPOtool.com
Item 62983
Page 4
The Tool Experts
11 2022-1
Main components and their name
№
Name
№
Name
1
Thread frame with right/left conversion
5
Ratchet lever
2
Turning rod
6
Workpiece (pipe)
3
Connection rod
7
Vice to pipe (not included in the scope of
delivery)
4
Cutting head
Use
1.
Connect the turning rod
(2)
with the connection rod
(3)
and thread frame
(1).
2.
Set the cutting head
(4)
into the thread frame
(1)
with the help of the safety ring. Then turn the
tap cutter clockwise or extract the ratchet lever
(5)
and turn it by 180°.
3.
Check if the diameter of the pipe at the position to be threaded answers to the technical require-
ments.
4.
Oil the end of the pipe to be cut to ensure the correct temperature at the position to be threaded
and the precision of the thread.
5.
Fix the pipe
(6)
into the pipe vice
(7)
and set the cutting head
(4)
onto the pipe. Hold the turning
rod
(2)
with one hand and use the other hand to set the tap cutter onto the pipe; then turn it.
6.
Continue until the edge of the pipe has reached the rear wall of the pipe tap cutter.
Warning!
Cutting the thread beyond this point might provoke the cutting edge breaking off.
7.
After the thread has been made, extract the ratchet lever
(5)
and turn it by 180°. Then take the
thread frame
(1)
and cutting head
(4)
off the pipe.
8.
To produce a thread of another size, you can exchange the cutting head
(4)
of the thread frame.
9.
Turn the tap cutter in the direction of the arrow found on the ratchet lever
(5).
10.
Use an appropriate oil to ensure a flawless operation.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
