https://www.XPOtool.com
Item 62975
Page 3
The Tool Experts
01 2022
-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions and precautions
Keep these instructions. They contain important safety information and precautionary measures, as-
sembly instructions, operating and maintenance instructions, parts lists and diagrams. Keep them in a
safe, dry place for future reference.
Warning:
Basic safety precautions should always be followed when using tools to reduce the
risk of property damage and personal injury. Read all instructions before using this device!
•
Keep the work area clean and tidy. Untidy work areas invite injuries.
•
Observe the working area conditions. Do not use machines or power tools in damp or wet
rooms. Do not expose them to the rain. Make sure that your work area is well lit. Do not use
electrically operated tools near flammable gases or liquids.
•
Keep children away from the work area. They are not allowed to stay there under any circum-
stances. Do not let them work with machines, tools, or extension cords.
•
Store unused devices. When not in use, tools must be stored in a dry place to prevent rust
formation. Always lock tools in and keep them out of children’s reach.
•
Use the correct tool for the specific task for which it is intended. Do not try to use a small tool to
do the work of a larger industrial tool. This tool has been designed for specific uses. It works
better and safer when it is used for them. Do not structurally change this tool or use it for any
purpose for which it is not intended.
•
Wear protective clothing. Do not wear loose clothing or jewellery as they can get caught in
moving parts. It is recommended to wear non-conductive protective clothing and non-slip shoes
when working. Wear a hairnet to protect long hair.
•
Use eye and ear protection. Always wear approved protective goggles and, if metal shavings
are generated during work, a full protective shield.
•
Do not overestimate yourself. Always make sure that you have a good stance and keep your
balance. Do not reach over running machines.
•
Maintain the tools carefully. Keep them sharp and clean for better and safer performance. Follow
the directions for lubricating and replacing accessories. Regularly check tool cables and only
have a licensed technician repair them if damaged. The handles must always be kept clean, dry
and oil and grease free.
•
Avoid unintentional switching on. Make sure that the switch is off when the device is not in use
and before you plug the plug into the socket.
•
Stay alert, and focus your full attention on what you are doing. Do not use any tools when you
are tired.
•
Check all parts for damage. Before using any tools, any part that appears damaged should be
carefully inspected to determine whether it is working properly and as intended. Inspect the
alignment and connection of any moving parts or mounting fixtures for breaks and any other
condition affecting proper operation. Any damaged part must be properly repaired or replaced
by a qualified technician. Do not use the tool if the device cannot be switched on and off correctly
using the switch.
•
Protect yourself against electric shock. Avoid body contact with earthed surfaces such as pipes,
radiators, stoves, and refrigerators.
•
Spare parts and accessories: Only use identical original spare parts for maintenance. The use
of other parts voids the warranty. Only use accessories designed for the use of the device.
•
Do not use the device if you are under the influence of alcohol, drugs, or medicine. Read the
warnings on the package insert to determine if your judgment or reflexes are impaired while
taking medicine. If in doubt, the tool must not be operated.
