XPOtool 62883, Operation Manual, Page: 5 / 10

© by WilTec Wildanger Technik GmbH Article 62883, 62884 Page 5
http://www.WilTec.de
http://www.aoyue.eu 01 2022 -1
http://www.teichtip.de
•
Using this tool for sanding or grinding certain products, paints and wood may expose the user
to dust containing hazardous substances. Use suitable respiratory protection.
Caution! Misuse or failure to observe the safety instructions given in these operating instructions may
result in serious injury.
Operating instructions
Ring handle
To operate safely and conveniently, please use
the auxiliary handle. Fix the auxiliary handle by
aligning its convex parts with the head case re-
cess and fastening the socket head screw with a
socket screw wrench. You can install the auxiliary
handle in either direction.
Installation of the polishing wheel
Align the upper screw thread of the polishing
wheel with the output shaft. Press the self-locking
pin and rotate the polishing wheel clockwise until
its tightened. Press the self-locking pin and rotate
the polishing wheel anti-clockwise and you can re-
move it. When replacing the worn polishing pad,
make sure that the new polishing pad and the pol-
ishing wheel are aligned so that they both run
round.