https://www.XPOtool.com
Item 62822–62829
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety information and instructions
•
After receiving the product, make sure that there are no damaged parts and that all parts are
present. Read the instructions carefully, especially the safety instructions, before operating
the appliance.
•
This product can only be connected to a grounded socket that is earthed.
•
The socket must be placed in a stable location and horizontally or vertically.
•
Make sure that the socket is not inserted into a hollow. Rain might cause the socket to be
under water which must be avoided.
•
The socket must be installed at least 0.5
m away from any water place.
•
This socket has been designed to prevent it from spray water.
•
If you want to move the socket, it must be interrupted from the power supply before discon-
necting it.
•
If the product's housing is damaged (e.g., by impact) and the product cannot meet the re-
quirements of IP44, it must not be used.
•
The socket must only be used in an upright position. If this is not the case, you must check
whether water has already penetrated the product before using it. If water has penetrated the
socket, it must not be used.
Technical data
Energy supply
250
V, 50
Hz (alternating current)
Nominal current
(A)
16
Nominal power
(W)
3680
Protection type
IP44
General description
This socket outlet is designed for household use. It meets the requirements of splash water protection
(protection class IP44). This product is not suitable for use on construction sites or in other harsh envi-
ronments.
The outdoor socket outlet has 2
switches, each of which can be switched on or off for two sockets via
the corresponding switch (switch position I/O).
1.
Insert the plug of your device into one of the sockets of the outdoor socket.
2.
If continuous current is required, set the toggle switch to “I.”
3.
Set the switch to “O.” The two associated sockets are de-energised.
Operating instructions
1.
Connect the cable of the product to the input power.
2.
Switch on the corresponding switches for the sockets and select the desired function. If the
switch of a socket is set to “I,” the socket is switched on (kept energised). If the switch of a
socket is set to “O,” the socket is switched off.
