https://www.XPOtool.com
Item 62553
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Note!
To ensure perfect condition and safe operation, the user must observe and comply with the safety
and warning instructions in these instructions.
Intended use
The intended use of the device is to test 6
V and 12
V batteries and accumulators. Any other use than
specified is not permitted!
Operating conditions/safety instructions
•
The device may only be operated at the voltage specified for it.
•
The operating position of the unit is horizontal and resting on the rubber feet so that the display
points upwards.
•
It is essential to ensure that the technical specifications given in this manual are observed. Ex-
ceeding the specified values may cause damage to the unit or the object to be tested.
•
The unit must not be placed in the vicinity of strong high-frequency or magnetic fields, as this
may cause the unit to enter an undefined operating state, resulting in incorrect test results.
•
Ventilation slits or vents prevent an excessive rise in temperature. Keep materials such as flam-
mable substances or paper away from the unit.
•
Do not install the unit in a place where it is exposed to high humidity or vibrations.
•
The device is intended for use in dry and clean rooms.
•
If condensation forms, wait up to 2
hours for the unit to acclimatise.
•
Protect the unit from moisture, splashes of water, and the effects of heat.
•
The unit must not be used in conjunction with highly flammable and combustible liquids.
•
This device may only be used by persons with limited physical, sensory, or mental abilities or a
lack of experience or necessary expertise if they have been introduced to the use of the device
by a competent person familiar with the device and responsible for them, and if they are super-
vised by this person.
•
Children must not use the device and must be supervised in its vicinity to ensure that they do
not play with the device.
•
Do not operate the assembly in an environment where flammable gases, vapours, or dust are
present.
•
Repairs may only be carried out by a trained electrician. Only original spare parts may be used
for repairs. The use of different spare parts can lead to serious damage to property and personal
injury.
•
The unit must always be disconnected from the test object before use.
•
Before commissioning, always check if the unit or assembly is suitable for the desired applica-
tion. In case of any uncertainties or questions, contact a specialist.
Product features and description
•
Portable
•
No external power supply required
•
Tests can be completed in a short time
•
Impact resistant
•
No annual calibration required
•
Copper-plated high performance terminal blocks
•
Ventilated
