https://www.XPOtool.com
Item 62421
Page 4
The Tool Experts
10 2022-1
•
Keep all unauthorised persons away from the gearbox jack while lifting, lowering, and transport-
ing the jack and gearbox.
•
Keep an eye on the correct balance and a firm stand. Make sure that the floor is not slippery
and wear anti-slip shoes.
•
Do not wear loose clothing or jewellery. Long hair must be tied back.
•
Warning!
Make sure that the load has a horizontal and centred position on the saddle of the
jack and that it is fixed before trying to lift, lower, or transport the load.
•
The lowering speed depends on the weight of the lead and the adjustment of the purge valve.
•
Make sure that the saddle of the jack has been lowered completely and that it is clean, dry, and
oil-free before trying to move the jack with or without a load.
•
You must pay attention to supervise the entire process until its finish.
•
Warning!
Do not use the gearbox jack when parts are damaged or missing.
•
Do not exceed the nominal load capacity of the gearbox jack.
•
Do not allow any untrained person to use the jack.
•
During operation, do not hold any part of your body inside or under the gearbox jack.
•
Neither lift nor lower the lifting ramp on which your vehicle is standing during the use of the
gearbox jack.
•
Do not transport the gearbox jack with or without a load when its saddle is lifted.
•
Keep the gearbox jack away from humidity. Do not use it at humid moist or humid spots or in
work zones where the air humidity is high.
•
Do not use the device when being tired or under the influence of alcohol, drugs, or medicine.
•
Do not use the gearbox jack to lift or support a vehicle and do not use it as load-carrying equip-
ment.
•
Only use the gearbox jack to unmount, transport, or mount a gearbox. Any incorrect use will
increase the risk of accidents and injuries.
•
Do not move the gearbox jack without the load having been secured sufficiently.
•
Do not modify the gearbox jack and security valve.
•
Do not remove any label from the jack. If any of the labels is damaged or unreadable, it must
be replaced.
•
Do not use brake fluid to refill the hydraulic unit. Only use hydraulic oil.
•
Only have the gearbox jack maintain and lubricate by a qualified person.
•
Before storing the jack in a safe spot, do make sure that all parts are clean, free from grease,
and free from oil (especially the saddle).
•
Lower the saddle completely when the jack is not used.
Operation instructions
Warning!
Before operating the jack, make sure to have read and understood the safety instructions and
that you are able to follow them. Pay particular attention to the following aspects:
•
positioning the jack under the load
•
lowering the load
•
transporting the load
•
re-mounting the gearbox
Maintenance
Attention!
Only qualified persons should perform maintenance or repair works.
•
When the gearbox jack is not used, the saddle must be lowered completely to minimise corro-
sion of the cylinder and piston.
•
Keep the gearbox jack clean and wipe off any trace of oil or grease. Lubricate all moving parts
with acid-free oil.
•
The oil cylinder is a sealed unit; it must not be opened. If maintenance is necessary, contact a
qualified person.
•
Warning!
Only high-quality hydraulic oil may be used. Do not use any brake fluids.
