https://www.XPOtool.com
Item 61574
Page 4
The Tool Experts
05 2022-1
Mounting and operating instructions
•
Attach the frame
(1)
to the workbench via 0.95
cm (⅜″) mounting bolts (not included in the de-
livery).
•
Attach the handle balls
(4)
to the handle levers
(3)
and then attach the handle levers to the
frame (see illustration).
•
For an easier use, please use a scriber (not included in the delivery) to engrave a straight line
into a metal sheet and be able to fold it afterwards.
•
Position the material needing to be folded above the carrier plate
(5)
and below the folding
panel
(6).
•
Place the wider base of the pressure plate above the material. Match the corner to the marked
folding line.
•
Please note:
First test the device on a scrap metal sheet to determine the required distance.
•
To keep the pressure plate down, use clamps (not included in the delivery) or other tensioning
tools.
•
Lift the handle levers, to fold the material in the desired angle.
•
Warning:
During the use, keep your fingers away from the carrier plate and the moving plates.
•
Please note:
The handle levers are not designed to be attached to the frame continuously.
•
When the work is finished, remove the pressure plate and clean the surface. Then clean the
press brake with a smooth and clean cloth and store the press brake in a safe and dry area out
of the reach of children.
Components and their names
№
Name
Qty
№
Name
Qty
1
Frame
2
4
Handle balls
2
2
Pressure plate
1
5
Carrier plate
1
3
Handle levers
2
6
Folding panel
1
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.
( )
( )
( )
( )
( )
( )
( )
