https://www.XPOtool.com
Item 51707
Page 9
The Tool Experts
08 2022-1
Step
7: Fastening the coupling rod to the support
Attach the coupling rod to the shelf with the large
opening of the compartment slot facing forward.
Tighten the rod with the upper shaft holes on the
right side of the slot (seen from the front). For the
right-side spring connection holes (front view)
use a
5
⁄
16
″×1
3
⁄
16
″ screw, two ¼″ spacers per screw,
and a
5
⁄
16
″ hex lock nut. For the left side of the
connection, use a
5
⁄
16
″×1″ bolt and a
5
⁄
16
″ hex lock
nut, not spacers. For holes to the left of the stor-
age slot (front view), use the
5
⁄
16
″×1
3
⁄
16
″ hex bolt,
two ¼″ spacers per bolt, and the
5
⁄
16
″ hex lock nut.
Tighten all connections.
1. Hexagon head screw
5
⁄
16
″×1
3
⁄
16
″
2. Hexagon nut
5
⁄
16
″×1″
3. Locking nut
5
⁄
16
″
4. ¼″ spacer
Step
8: Fastening the centre support
Position the tray between the side
plates by hanging them into the plates.
Temporarily attach the right end plate to
the top plate with two
5
⁄
16
″×⅞″ screws
(see fig.). Swing the middle strut into
position and secure with
5
⁄
16
″×1″ screws,
⌀
8 washer and
5
⁄
16
″ hex lock nut.
Do not
tighten firmly.
1. Hexagon head screw
5
⁄
16
″×1″
2. Locking nut
5
⁄
16
″
3. Central support
4. Spacer
⌀
8
( )
( )
( )
( )
( )
( )
( )
( )
