MEET YOUR X3
4
Installation instructions
Installation steps
1. Hold the bike mount on top of the rubber pad evenly
together, ensuring they are aligned squarely to each
other. Then place them on the bike handlebar.
2. Loop an elastic band from one tab of the bike mount.
Stretch the free end of the elastic band underneath
the bike handlebar and up to the other tab. Ensure the
bike mount stays in place securely.
3. Align the latch on the back of X3 with the bike mount
notch. Press downward slightly and turn X3 until it
locks in place.
De-installation steps
1. Rotate X3 counterclockwise until the latch no longer locks it.
2. Remove X3 and keep it in a safe place.
Perform the initial settings
Initial settings will be conducted when you power on X3 for the first time. Please input
language, gender, age, weight and height information as shown on the screen in that order.
When making numeric settings, please refer
to the button prompt at the bottom of the
screen, the right button (
Next
) enables you
to switch between each number and Save
status; the left button and middle button can
otherwise increase and decrease numbers.
After adjusting the numeric settings, press
the right button to switch to
Save
status and
then press the middle button to save.