Route
19
Pause and continue
Switch page
Pressing the right button on the cycling screen will switch to the default pages. The indication
bar at the bottom of the screen will show the current page. (For more information on page
settings, please refer to RIDE -
Page Selection
and
Set Pages
.)
RIDE
After entering the cycling screen, the
computer will detect motion after you start
RIDE and a box asking if it should start
recording pops up.
In recording status, a red light will flash by the
power indicator on the right upper corner of
the screen.
When you finish riding, the computer will
detect that motion is stopped and will stop
recording automatically. When the ride
pauses, the red indicator will stop flashing
and the computer will record automatically
again when the ride continues.
If pause recording is used manually, press
the middle button will continue recording in
the paused status.
Red indicator