2. You may set up the backlight mode, time and brightness. It is recommended to
set the backlight mode to auto, X2 will automatically turn on/off the backlight.
3.3
Others
1. Enter X2 [Settings] > [Other]
2. The function description of each category is as follows:
Category
Description
Auto Start
After entered the X2 screen, if X2 sensed movement speed that
is greater than 3 km/h and lasts for more than 2 seconds, it will
automatically start recording.
Auto Pause
If X2 sensed movement speed that is less than 3km/h during
riding and lasts for more than 1 second, the recording will be
paused automatically.
Smart Record Record data frequency is every 5-10 seconds/data, without
affecting the GPS trajectory. After enabling this function, the
file size is approximately one-fourth of the recorded data per
second.
Battery Save
Turning on the GPS chip power saving mode can increase the
X2's battery life by more than 40 hours.
Auto Power
Off
If there is no operation on the X2 for 15 minutes and X2 is not
in sleep mode, then X2 will automatically shut down with a 15-
second countdown notification. During the 15 second
countdown, press any button on X2 will cancel the automatic
shutdown.
4
Pairing with sensors
1. Enter X2 [Sensors] > [Add Sensor]
2. X2 will search for nearby ANT+ devices that are functioning. You can select the
ANT+ device you want to connect to with the two buttons on the right. After
selecting, press the lower right button to connect to the device.
