34
4.
Attach the magnet to the left crank. Do not fully tighten.
5.
Adjust the magnets and the sensors, making sure the air gap between sensor
markings and magnets is less than 5 mm.
6.
When setup is complete, tighten the cable ties.
Changing the Combo Cadence Battery
1.
Using a coin, turn the battery cover on the back of the sensor
counter-clockwise until it opens.
2.
Remove the old battery and replace with a new one.
3.
Replace the battery cover and tighten with a coin.
Power Meter (optional)
The following power meter devices are compatible to your Xplova E5: SRM, Quarq,
Power2Max.
NOTE:
For the most updated compatible ANT+ power meter information, visit
www.xplova.com
.