background image

15

INCORRECT

CORRECT

Cible

If you are having difficulty locating the target then sweep the place where 
you heard the sound. Move a quarter turn around the spot and begin 
sweeping again in the same way. You should then locate the precise 
zone containing your target at the intersection of the two sweeps 
where the sound is loudest.

Metal detecting is a fascinating leisure activity that can bring you a lot of satisfaction. However, it requires 
a minimum of learning in order to get the most enjoyment. Begin by familiarising yourself with your 
equipment and its operation on a suitable practice ground. To do this, we recommend that you take an 
assortment of different objects: coins, everyday items, metal rubbish, etc. Then find a patch of ground 
relatively free from metal pollution and far away from any electromagnetic interference (high voltage 
power lines, electric fences, domestic appliances, etc.). For instance, your garden would probably be 
one of the most unsuitable places to begin as there is too much domestic waste in the vicinity.

Arrange your objects on the ground then, take some time to observe your device’s reactions when it passes 
over each target.

POWER SUPPLY-BATTERIES

PRACTICAL INFORMATION

Batteries

- The batteries are fitted with internal protection systems which shield them from extreme overloads 

and discharges. They must not be dismantled or short-circuited, which is dangerous.

- Do not leave batteries charging unnecessarily.

- If you notice any perforation, odour or other anomaly, please take the battery to a designated 

   collection point.

- Never dispose of lithium batteries with your household waste: depose them at a collection point.

- Do not place the batteries near heat sources and never throw them onto a fire.

- Never perforate the battery cover or try and weld/solder the battery.

- Risk off explosion if battery is incorrectly replaced.

- Replacing the battery with an incorrect type can lead to an explosion risk. Only use LiPo batteries.

- Acceptable ambient temperature during charging: from 

0°C 

to

  + 35°C Maximum

- Recommended storage temperature: 

25°C

.

- If you notice an abnormal overheating of the support elements, immediately unplug the power 

supply and do not attempt to recharge.

- Do not travel by air with a defective or questionable battery.

ADVICE BEFORE BEGINNING DETECTING

LOCATING A TARGET USING CROSSED SWEEPS IN MOTION MODE

Summary of Contents for ORX

























Reviews: