Xplore 3D PROTO, Quick Start Manual

Page: 15 / 18

3. Connect the USB cable to XPLORER 3D PROTO and to the computer.
4. Place one, and only one, layer of Adhesive tape on the printer bed
Glass/Acrylic, carefully to avoid any overlapping (Already done in some
cases).
5. Place the spool inside the spool mount. Take care to keep the filament
wound tight, because any looseness might cause kinks or knots to appear in
the filament, which makes printing impossible.
6. Place assembled items (spool + mounting) on the left side of your XPLORER
3D PROTO from where the filament is entering the extruder motor.
7. Click the main switch to the “ON” position.
3
4