XPENG P7 2023 User Manual Download Page 286

Page: 286 / 316

Emergency Aid

285

4
5

9
10
11

5. Turn on the power switch button (black),

Turn on the power switch button (black),
inflate the tire, and observe the air pressure

inflate the tire, and observe the air pressure
gauge. Turn off the switch when the tire

gauge. Turn off the switch when the tire
pressure reaches the recommended value,

pressure reaches the recommended value,
and pull out the inflation tube and electrical

and pull out the inflation tube and electrical
source plug.

source plug.

Vehicle Power-Off Operation

Conventional Power-Off

When the vehicle is powered on or in the READY

When the vehicle is powered on or in the READY
status, if the driver's seat is not occupied and all

status, if the driver's seat is not occupied and all
doors (including the front hatch and trunk cover)

doors (including the front hatch and trunk cover)
are closed, the following operations will power off

are closed, the following operations will power off
the vehicle:

the vehicle:

●

Lock the vehicle with the smart key.

●

Lock the vehicle with XPENG APP.

Summary of Contents for P7 2023





























































































































































































































































































































Search results

Summary of Contents for P7 2023

Reviews:

Related manuals for P7 2023

Brands by name

Popular brands

XPENG P7 2023, User Manual

Search results

Summary of Contents for P7 2023

Reviews:

Related manuals for P7 2023

Brands by name

Popular brands