background image

28

GUARANTEE

Terms and Conditions for UK & ROI (outside UK & ROI contact your local distributor)

We, Applied Energy Products, guarantee this product against faulty workmanship and material defects for a period 
of  5 years  from  the  date  of  purchase subject  to  regular  servicing  by  by  Applied  Energy  Products  Limited, or  our 
approved agents. 

In the event of a product breakdown during the guarantee period, you should initially contact your installer, before 
contacting Applied Energy Products on the Technical line number below providing that:

a) The product has been installed in a residential or light commercial environment. 

b) The  product  has  been  correctly  installed  and  commissioned  in  accordance  with  our  instructions  and  is  being 

used on the supply circuit or voltage printed on the rating plate.

c) The product has been used in accordance with these instructions and has not been tampered with or otherwise 

subject to misuse, neglect or accident.

d) The  product  has  been  regularly  maintained  in  accordance  with  these  instructions  and  the  airway  is 

unobstructed.

e) The product has not been taken apart, modified or repaired except by a person authorised by us.

f) Evidence of the date of purchase in the form of an invoice or receipt will be required in order to qualify under the 

terms of this guarantee.

g) For  the  service  work  to  be  undertaken  free  of  charge,  the  work  must  only  be  undertaken  by  Applied  Energy 

Products Limited, or our approved agents.

h) Service  under  guarantee  has  no  effect  on the  expiry date.  The  guarantee  on  any  exchanged  parts  or  product 

ends when the original guarantee period ends.

i)

In  the  event  of  a  product  being  returned  to  Applied  Energy  Products  Limited  and  not  found  to  be  faulty,  the 
product  would  be  available  for  collection  from  the  relevant  premises  within  one  month  and  if  not  collected  it 
would be disposed of or delivered by Applied Energy Products Limited and a delivery charge made

.

EXCLUSIONS

This guarantee does not apply to the repair or replacement of Filters, Accessories, Isolating switches, Electrical 
cable, Fuses and/or Circuit breakers or annual servicing.

This guarentee covers products supplied by Applied Energy Products only and does not cover other products and 
components used to create a system that have not been purchased from Applied Energy Products.

The responsibility for the suitability of the complete system for the specific application remains the responsibility of 
the original specification engineer.

This guarantee does not cover damage or defects arising from poor or incorrect installation, improper use or lack of 
maintenance. It is the responsibilty of the installer to check that the installation parameters meet the requirements 
of the product, and any relevant regulations.

If we are called out to a fault, which is subsequently identified as being an installation fault, we will make a charge. 
It is important that the routine checks are completed before calling us out, as many issues can be simply diagnosed 
and resolved.

We make no guarantees as to response times for repairs. We will endeavour to achieve the most timely response 
possible but while we indicate an average response time, this should not be taken as a guarantee.

The guarantee applies to a repair or replacement (at our discretion) of the product subject to the conditions above, 
and does not cover compensation for the loss of the product or consequential loss of any kind.

This guarantee does not affect your statutory rights.

Booklet 23515AA Rev. A

Applied Energy Products Limited
Morley Way
Peterborough
PE2 9JJ

Customer Care / Technical Line: 0844 372 7766
Customer Care / Technical Fax:  0844 372 7767
Sales Line:       

0844 372 7750

Sales Fax         

0844 372 7760 

www.applied-energy.com

Xpelair is a registered trademark of Applied Energy 
Products Limited.
Applied  Energy  Products  reserve  the  right  to  alter 
product  specifications  or  appearance  without  prior 
notice. All finishes and diagrams in this booklet are 
as accurate as printing processes allow.

Summary of Contents for Xcell 150 QV





























Reviews: