background image

GUARANTEE 

Terms and Conditions for UK & ROI (outside UK & ROI contact your local distributor) 

We, Applied Energy Products Limited, guarantee this product 

for residential use only

, for the period of 5 years 

from the date of purchase subject to the following conditions – initial 3 years parts and labour, final 2 years parts 
only. 

Within the guarantee period we will resolve,

 free of charge

, any manufacturing defects in the product resulting 

from faulty workmanship or material on condition that:- 

a)  The appliance has been correctly installed in accordance with our instructions and is being used on the supply 

circuit or voltage printed on the rating plate. 

b) The appliance has been used in accordance with these instructions and has not been tampered with or 

otherwise subject to misuse, neglect or accident. 

c) The appliance has been regularly maintained in accordance with these instructions and the airway is 

unobstructed. 

d)  The appliance has not been taken apart, modified or repaired except by a person authorised by us. 

e)  Evidence of the date of purchase in the form of an invoice or receipt will be required in order to qualify under 

the terms of this guarantee. 

f)  For the service work to be undertaken free of charge, the work must only be undertaken by Applied Energy 

Products Limited, or our approved agents. 

g)  Service under guarantee has no effect on the expiry date. The guarantee on any exchanged parts or product 

ends when the original guarantee period ends. 

h)  In the event of a product being returned to Applied Energy Products Limited and not found to be faulty, the 

product would be available for collection from the relevant premises within one month and if not collected it 
would be disposed of or delivered by Applied Energy Products Limited and a delivery charge made. 

EXCLUSIONS 

This guarantee 

DOES NOT

 cover damage or defects arising from poor or incorrect installation, improper use or 

lack of maintenance. It is the responsibilty of the installer to check that the installation parameters meet the 
requirements of the product, and any relevant regulations. 

If we are called out to a fault, which is subsequently identified as being an installation fault, we will make a charge. 
It is important that the routine checks are completed before calling us out, as many issues can be simply 
diagnosed and resolved. 

We make no guarantees as to response times for repairs. We will endeavour to achieve the most timely response 
possible but while we indicate an average response time, this should not be taken as a guarantee. 

The guarantee applies to a repair or replacement (at our discretion) of the product subject to the conditions 
above, and 

DOES NOT

 cover compensation for the loss of the product or consequential loss of any kind. 

This guarantee does not affect your statutory rights.  

 

Applied Energy Products Ltd 
Morley Way 
Peterborough 
PE2 9JJ 

 

 

Tel:  +44 (0)1733 456789 
Fax:  +44 (0)1733 310606 
Sales Hotline: +44 (0)8709 000420 
 
For Technical Advice (Techline) 
Tel:  +44 (0)8709 000430 
Fax:  +44 (0)8709 000530 
 
For Spares Requirements (UK Only) 
Tel:  +44 (0)8709 077077 
Fax: +44 (0)8709 076076 
 
www.applied-energy.com 

Xpelair is a registered trademark of Applied Energy Products Limited. 
Applied Energy Products reserve the right to alter product specifications 
or appearance without prior notice. All finishes and diagrams in this 
booklet are as accurate as printing processes allow.

  

A4 Leaflet Number: 23161AA Revision A 

 

 

Xpelair 

 
 Low 

Energy 

Wall/Window Fan Range 

 

 

 

GX6 EC2 

 

GXC6 EC2 

 
 
 
 

 

Installation and Maintenance Instructions 

 

 

Retain for future reference 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for GX6 EC2







Reviews: