Xpelair Premier DX200 Installation And Maintenance Instructions Manual Download Page 10

Do’s

Do - Read all the instructions before commencing installation.

Do - Install each fan with a double pole isolation switch.

Do- Make sure that the mains supply is switched off before attempting to make electrical

connections or carry out maintenance or cleaning.

Guarantee

Customers outside UK - see International below.

UK: The fan is guaranteed against defects for 3 years from the date of purchase.

Xpelair reserve the right to repair or replace at their option.

Please keep your purchase receipt.

If you have any problems, contact Xpelair’s Head Office at the address shown below. 

Technical advice and service

Customers outside UK - see International below.

UK: Xpelair have a comprehensive range of services including:

Free technical advice help-desk from Engineers on all aspects of ventilation.

Free design service, quotations and site surveys.

Service and maintenance contracts to suit all requirements.

Please ask for details:

By telephone on Techline: 

+44 (0)8709 000430

By fax on Techfax: 

+44 (0)8709 000530

At the address below

Head Office, UK Sales Office and Spares

GDA Applied Energy Ltd, Morley Way, Peterborough PE2 9JJ England.

Telephone: 

+44 (0)1733 456789

Fax: 

+44 (0)1733 310606

Sales/Spares Hotline: 

+44 (0)8709 000420

Sales/Spares Faxline: 

+44 (0)8709 000520

http://www.xpelair.co.uk

International

Guarantee: Contact your local distributor or Xpelair direct for details.

Technical Advice and Service: Contact your local Xpelair distributor.

BS EN ISO

9001

FM11408
QAS 3284/37

18491AA

Summary of Contents for DX200











Reviews: