ENGLISH
20
6. APPLICATION
7. GENERAL OPERATION OF THE CONTROL PANEL
BOOSTER:
Pressurization systems with alternating operating logic that require the use of 2 pressure
switches (START / EMERGENCY) and 1 minimum float.
L’
EVO 2
MULTI
is a control panel with electromechanical equipment. It can be used for 2 types of
application:
BOOSTER
and
SEWAGE
.
SEWAGE:
Water lifting systems with alternating operating logic that require the use of 3 level floats
(MINIMUM / MAXIMUM 1 / MAXIMUM 2).
To select the application it is necessary to use the special DIP-SWITCH present in the MULTI 2 relay
located inside the
panel.
control
pened and the motor will no longer be fed.
In this condition the control panel starts the motor excluding the control on the pressure switches or
float
s
.
switche
-
Automatica
-
Manuale
The malfunction (motor overload) is indicated by the red light. In this condition, the contactor is o-
It is possible to operate the
EVO 2 MULTI
in two ways for each
:
motor
In this condition the
panel starts the motor taking into consideration the operating logic of the
control
MULTI 2 relay.
The correct operation (motor running) is indicated by the green light.
To restore the proper operation, press the reset button in the thermal of the motor.
