Xoro HSD 7790, Operation Manual

Page: 85 / 146

HSD 7790
35
Engl
ish
Move to Installation and press OK , then a submenu shall be popped up which includes three op-
tions:
•
Auto Scan
•
Channel Scan
•
Tuner Setting
Auto Scan
Scan Mode: Free (scan all free channels), All
(scan all channels including free and paid ones);
Search: Press
OK to display Scan box and con-
duct auto scan, or press SETUP or EXIT to quit.
The scan box indicates the scan process by per-
centage of completion; On the top there is details
about Scan Band, Frequency, Demodulation
mode, Channel No, Transmission mode and
Guard Interval etc.; Below are the scanned TV
channels and radio channels displayed in two
columns.
Channel Scan
•
Scan Mode: By Channel and By Fre-
quency. Either alternative shall be fine for
scan.
•
Scan Band: VHF/ UHF available.
•
Ch No. : Channel 5~12 ( VHF), and Chan-
nel 21~69 (UHF)
•
Frequency: 174~230 MHz (VHF),
470~862 MHz (UHF) are available.
(The frequency system can be set auto-
matically according to different regions,
and the actual frequency point should
be referred to the practice).
•
Band Width: There are three options: 6
MHz, 7 MHz, and 8 MHz.
•
Search: Move the cursor here and
press
OK , then a information box shall
appear indicating the scanning process.
Pressing Exit allows you to cancel scan
and quit current interface. The scan
process box shows the progress of
scan by percentage of completion; On
the top there is detail about Scan Band, Frequency, Demodulation modes, Channel No,
Transmission mode and Guard Interval etc.; Below are the scanned TV channel list and
radio channel list displayed in two columns.
Notes:
1. Only when Scan Mode is set to “By Channel”, can Scan Band and Ch No be ready for setup.
2. Only when Scan Mode is set to “ By Frequency”, can Frequency and Band Width be set.
DVB-T Setup