Xoro HMT 350, Operation Manual

Page: 55 / 124

HMT 350
15
Engl
ish
AV output (CVBS)
You can connect an external larger screen on the component input of the TV set. Connect
the three-pin video cable to the "AV" input of a TV. Please pay attention to the colour coding
on the TV (Yellow = Video / WHITE & RED and = Left and Right audio channel). Now,
connect the 3.5 mm jack with the CVBS connection to the HMT 350.
Select the video output to the
TV OUT button or by using the settings (Settings -> Video Output -> TV
output -> CVBS) and start the function with the ENTER key. Picture and sound switches off and an
image appears on a television complete with sound.
Repeatedly pressing the
TV OUT button ends complete the video output of the HMT 350 and on the
small screen of the HMT 350 again is a visible image / sound audible.
The PIN assignment of the cable is shown as follows:
L
Left audio channel
R Right audio channel
CVBS Composite video (CVBS) video signal
GND Ground
Stereo input (LINE IN)
You have the possibility to connect an external MP3 player or iPod for music playback at
the HMT 350. Use an appropriate adapter cable (3.5mm jack) and connect it on to the
LINE IN port. Connect to the other of the adapter cable to the MP3 player or iPod.
Jump the main menu of the HMT 350 to the setting
LINE IN and confirm the selection with
the ENTER key. The unit will now go into the stereo input.
Card Reader
1. The card reader supports SD memory cards up to a size of 2 GB.
2. SDHC memory cards are supported up to a size of 16 GB.
3. Place the SD or SDHC card to show, so the contacts to the top and
show the label down.
4. Insert the card with the notch left (view from back) ahead in the slot.
5. Push the card gently into it completely until it is tight.
Unfortunately, many of the different memory cards are not supported.
Note:
Make sure that the notched corner of the SD card and you can not take this the wrong way.
Connection
L
R FBAS
GND