Xorcom XP0150G User Manual Download

Page: 11 / 126

Overview

LED Instructions

Power Indicator LED

LED Status

Description

Solid red

The phone is initializing.

Fast flashing red

The phone is ringing.

Slow flashing red

The phone receives a text message or voice mail.

Off

The phone is powered on.
The phone is powered off.
The phone is idle.

Line key LED

LED Status

Description

Solid green

The line is seized.
The line is in conversation.

Fast flashing green

The line receives an incoming call, the phone is ringing.

Slow flashing green

The call is placed on hold.

Off

The line is inactive.

Line key LED

(configured as BLF key)

LED Status

Description

Solid red

The monitored user is busy.

Fast flashing red

The monitored user receives an incoming call.

Off

The monitored user is idle.
The monitored user does not exist.

Line key LED

(configured as shared line key)

LED Status

Description

Solid red

The shared line is seized.
Some party receives the ringback.
The shared line is in conversation.

Fast flashing green

The shared line receives an incoming call.

Slow flashing red

The shared line conversation is placed on public hold.
The shared line conversation is placed on private hold.

Slow flashing orange

For multi-party call, all the parties place the shared line
conversation on hold.

Off

All the parties are idle.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands