GW0017 User Manual
81
Figure 4-46 Capture DSP Packages
Click Start to enable DSP capture
Dialing out through the device, start talking a short while then hang up the call.
Click Stop to disable DSP capture
Save the capture to local computer
The captured package is named ‘capture(x).pcap’, among which x is the serial number of the
capturing and will be added 1 in next time. The sample of RTP capture as below:
4.15.8
Factory Reset
Click ‘Apply’ to restore configurations of the device to the factory default settings.
Figure 4-47 Reset Device to Factory Default Setting
4.15.9
Device Restart
For some configurations or changes to the GW0017 device, you are required to restart the
device for the configurations or changes to take effect.
